How Loose Should Roller Skate Trucks Be

We often hear the question “How Loose Should Roller Skate Trucks Be”, in this article we will review this question and provide you with some answers.

but first, you need to understand why roller skates have trucks and why it is so important.

What is a Roller Skate Truck and Why is it Important?

A roller skate truck is a component of a roller skate that holds the wheels in place. The truck is usually made of metal and consists of two parts, the hanger, and the axle. The hanger is attached to the underside of one skate’s frame, while the axle is attached to the other frame.

A truck’s primary function is to provide support for one wheel while allowing it to turn freely, allowing easier turning or “cutting” maneuvers.

The Difference between Tight or Loose Trucks

The difference between tight and loose trucks is one of the main factors in determining how a roller skate performs.

Tight trucks are more responsive and can make sharper turns, but they will also have less stability when stopping. Loose trucks are more stable than tight ones, but also less responsive.

Skaters who like to do jumps or spins should go for tight trucks because their responsiveness will help them perform better. If you’re just skating around town, loose trucks would be a better option as they provide more stability.

How Loose Should Roller Skate Trucks Be

There isn’t one single perfect setup, it depends on what you want to get out of your trucks. Test some things and see what feels the best. If your trucks feel wobbly and aren’t giving you the turns you hoped for, try getting softer cushions that help with maneuverability.

How Loose Should Roller Skate Trucks Be

Is it Better to have Loose or Tight Trucks?

The skating ability of your trucks can be adjusted with spacers (looser trucks) or tightening up the screws. When they are too tight, you’ll have trouble turning and carving. If they are too loose, it will be harder to control where your roller skates end up going.

Are Loose Trucks Good For roller skating Beginners?

Loose trucks are not always good for beginners. They can be a little more difficult to control, but they also have some advantages.

Loose trucks are often considered the best option for beginners because they allow for more flexibility in turning and sliding. This is why you will often see them on roller skates that are designed for beginners. Some people think that loose trucks are easier to control because they don’t turn as tightly as other types of trucks.

However, loose trucks can be difficult to use if you’re just starting because they tend to make it harder to keep your balance and stay on your feet. If you’re looking for a more stable truck then we recommend using ones with narrowed axles or ones with axle nuts instead of bolts.

In our opinion the answer is no, Loose trucks are not good for roller skating beginners. The problem is that the loose trucks will make you lose balance and fall over. This is especially true for kids who are still learning to skate or for adults who have never skated before.

Are looser Trucks Better For Tricks?

There is a lot of debate about whether looser trucks are better for tricks. Some people argue that looser trucks are better for tricks because you can turn tighter with them. Others argue that tighter trucks are better for tricks because they have more stability and control.

The truth is, it all depends on the type of riding you do and the type of tricks you want to do. If you ride mostly in skateparks, then looser trucks will be better for you because they allow more freedom to do more radical maneuvers like slides and spins. If you ride mostly streets, then tighter trucks will be better for you because they offer more stability and control when doing technical maneuvers.

Looking to learn beginner’s tricks for roller skating? Check this guide out.

How to Adjust Roller Skate Trucks

This guide will show you how to adjust your roller skate trucks so that they are in the right position.

First, loosen the screws on the bottom of your trucks with a screwdriver.

Next, adjust the height of the truck by turning the axle nut clockwise or counterclockwise.

Finally, tighten up your screws and make sure that there is a gap between your wheels and frame by sliding them up or down.

Here you can see a video that will guide you step by step on how to adjust your trucks, credit to Moxi Roller Skates for this video.

In Conclusion

We hope this article provides you with some answers to how loose should roller skate trucks be, the short answer is there is no “right answer” it depends on your skills and skating style.

Do you need more information about roller skating? check some other guides for roller skates that we’ve made below.

Our Story

Welcome to Skates of Glory! Join us as we dive into the roller skating world, sharing insights, tips, and inspiration for skaters of all levels. Let's roll together and embrace the skate life!

Oliver Harris
Greetings fellow skater, I'm Oliver Harris!

Hello, I am Oliver Harris, a skilled roller skater with expertise in roller derby and speed skating who brings years of experience and contagious enthusiasm to Skates of Glory.

Emma Moore
Hey there fellow skater, my name is Emma Moore

I am Emma Moore, an accomplished artistic roller skater and professional coach who combines sports psychology with my passion for skating.

share this article


how to fall on roller skates

How To Fall On Roller Skates

Roller skating is a thrilling, fun-filled activity enjoyed by millions around the globe. It offers a unique blend of fitness, skill, and

how to play roller derby

How To Play Roller Derby

Roller derby is a high-energy, full-contact sport that has been captivating audiences and participants alike for decades. This thrilling sport has an